PSC GUIDE-IT® / LOAD CONTROL
Purpose-built push/pull tools and safety rigger taglines that help crews guide loads while maintaining distance from pinch and crush hazards.
GUIDE-IT IN ACTION / INDUSTRIAL LOAD POSITIONINGTHE GUIDE-IT RANGE
Select the tool for the task, available working space and the site’s lifting procedure.
01 / PSC-GIT SERIES
A fiberglass pole with a nylon engagement head, non-slip D-handle and integrated hand guard. Designed for guiding and positioning loads without direct hand contact.
A positioning aid. Do not use for lifting, prying or levering.
02 / PSC-GISRT SERIES
A polyester guide rope with a swivel hook for suspended-load guidance. The swivel helps reduce rope twist as the load rotates, supporting controlled handling at a distance.
For load guidance. Never wrap a tagline around your hands or body.
FROM THE WORKING FLOOR
Guide-It supports load guidance in offshore operations, fabrication yards, shipyards, ports and industrial maintenance.
Guide alignment during final approach, following the approved lift plan.
Use a suitable pole length to help maintain distance from the engagement point.
Use taglines where specified to assist directional control and load orientation.
BEFORE EVERY USE
Inspect. Check the pole, head and handle, or rope, hook and latch. Remove damaged equipment from service.
Maintain distance. Keep clear of the load’s travel, swing and pinch zones. Tool length alone does not establish a safe working position.
Follow the lift plan. Use trained personnel, agreed communication and site procedures. These products are load-guidance aids, not lifting equipment.
TECHNICAL RESOURCES
Supplied PSC datasheets. Confirm ratings, documentation and suitability with PSC for your specific application.
PART OF THE PSC HAND SAFETY RANGE
Share your application, required length and quantity with the PSC team.
PSC GUIDE-IT · ENQUIRIES
Share the application, preferred product and length, quantity and delivery destination. The PSC Hand Safety team will review your requirement.
For product documentation, use the datasheet links above.